34. Where should the tractor be when you inspect landing gear after uncoupling the trailer?
Detailed Explanation
Pull forward only until the fifth wheel clears the trailer, keeping the tractor frame underneath. The frame can catch the trailer if its supports collapse or sink. Secure the tractor before inspecting the supports.
Official reference: New York CDL Manual, Section 6.4.2: Uncoupling Tractor-SemitrailersCorrect Answer: With the tractor frame under the trailer.
Why This Matters on the CDL Test
This is an uncoupling and trailer-support inspection question. Check the supports before pulling completely clear.
How to Remember It
Fifth wheel clear; frame stays underneath until the supports are checked.
Answer Review
Keep the tractor frame under the trailer until you have checked that the ground supports the trailer and the landing gear is undamaged.
Why the other answers are weaker
- Completely cleared from the trailer.Pulling completely clear removes the backup support before the landing gear has been checked.
- With the fifth wheel directly beneath the kingpin.At this stage the fifth wheel has already cleared the trailer; the tractor frame remains underneath.
Test-Day Checklist
- Read the question once for the topic, then read it again for the exact CDL action being tested in Combination Vehicles.
- Eliminate answers that sound convenient but skip an inspection, warning sign, or safety step.
- Say the correct rule out loud before moving on so you can recognize it when the exam changes the wording.
Ready to practice for real?
Take our free, full-length Combination Vehicles practice test. Simulates the actual DMV exam with timed questions.
Start Practice TestRelated Questions
51. When you are uncoupling a loaded trailer, lower the landing gear until it:
57. While checking if the trailer is securely coupled to the tractor, the landing gears should:
90. You want to inspect the trailer supports. You should place the tractor transmission in which gear after you have uncoupled the trailer?
When uncoupling a trailer, landing gear should be:
1. You are coupling a semi trailer to your tractor but have not yet backed under. The trailer is at the right height when:
Keep Studying Combination Vehicles
Question pages help you review one rule at a time. To build test-day speed, move back into the full Combination Vehicles practice test and answer a mixed set without looking at the explanation first.
State CDL Practice Paths
After you understand this answer, use a state practice path to connect the federal CDL rule with the DMV test pages drivers search for most.